9/13/2013

Tips On Cleaning Glass Pipes

0 commentaires

Having glass pipes which have not yet been cleaned for a long time can have a lot of dirt which have already hardened. However, it is still possible to the cleaning by yourself. Here are some tips to do it in a simple way.


Removal of the particles that have lodge inside the thing is the first step to do and this is through turning the opening down and tapping it gently. Flushing the inside part with running water will also cause the removal of any stubborn dirt that has not yet been taken off. Careful holding of the wet object is important so that it would not be dropped or be slipped.


The most common and tested way of doing it is by using of rubbing alcohol. Obtain a resealable plastic bag or a sandwich bag and fill that with alcohol but only placing a sufficient amount enough to fill the bottom part. Be sure that the solution is adequate to submerge the object upon placing it inside the bag.


If the thing has already been place and properly submerged in the bag, place it in the microwave and set the timer for about ten seconds. Bring the alcohol to boil but be alert because this could happen pretty fast. Do not let the entire thing be heated for a long time because the plastic might melt and the glass might t also be broken.


Open the microwave, take out the bag and shake it so that the alcohol will go into the tubing to remove any remaining particles inside. Do not take the thing out yet because it still needs soaking over the night to loosen up any hardened debris. Make sure that it is sealed properly and have it soaked for eight up to ten hours.


After soaking, the thing can be taken out and rinse it well with cold water which is preferably running. Sometimes there will still be additional deposits which have not yet loosened especially if it has not been cleaned for a long time. Get a pipe cleaner or even a simple cotton swab can do the work in taking off the remaining stubborn dirt and rinse with water.


Dry the object thoroughly before using it again to complete the entire cleaning process. Another way of doing it however includes that us of boiling water for individuals who do not prefer the use of alcohol. Obtain a small pot filed with an enough volume to cover the object and have it be placed on the stove.


Reduce the heat to allow the boiling water to simmer so that the thing can then be safely placed while ensuring that it is properly submerged. But before that, be certain that all the extra and unnecessary particles inside have already been removed ahead. Have it be simmered for twenty to thirty minuted.


In cleaning your glass pipes, be sure not to put them in boiling water if they are cold because it will cause their shattering but warm them first with your palms. If the boiling method will be use, expect that the entire house will be filled with a strong odor. Be sure to wash them well before using.


Read more about Secrets In Cleaning Glass Pipes visiting our website.






Tips On Cleaning Glass Pipes



via downshar http://www.downshar.com/?p=1639

0 commentaires:

Enregistrer un commentaire