4/30/2014

Marble And Metal Maintenance The Easier And Cheaper Way

0 commentaires

Marbles and metals are one of the most expensive and luxurious material for some of the designs which we usually see in hotels, malls and other infrastructures. Sometimes, people in the elite class also have these things placed in their houses. But, most people have the same problems regarding it. They wonder how they could make it look new everyday. Marble and metal maintenance New York City specializes on that.


There are a lot who could offer to give you the service. But, it is always best to be able to do it on your own. There will be steps available for you to easily follow.


There are marbles that are natural and some are cultured. This is something which you really need to know. There are different ways in cleaning them, so you really have to familiarize that one that you have. If you just do the maintenance the way you think is right, there might be something worse that would happen to it which will cost you a lot to fix.


The major reason of stain is usually when something spills directly on it and is not cleaned immediately. Because of the span of time that it was left, it directly seeps through the marble making it hard to takeoff. That is exactly why you need to make sure that you immediately clean the stain the moment it spilled. In case you were not able to notice it immediately, you may use a sponge or any clean cloth dipped in a lukewarm water to start cleaning it.


Then you can start polishing the marble. You must know that it easily scratches. Only use clean and dry mop. You may also use a dust mop before polishing to remove the dirt. Make sure to dry its surface completely using a clean cloth.


Mix water and baking soda to polish it properly. You will see a better result with the mixture. Make sure that the mixture also has the right measurement. You will only need three tablespoons of the baking soda and 1 quarter of water. Too much or too low of something might give you the wrong result. Also apply only a small layer of it. Rinse it off and let it dry for at least 5 hours.


Although there is not much difference with the cultured one, since it is coated, you can polish it as hard as you want. Just make sure that it is not too much and peel off its coating. It is much easier to clean and does not scratch easily.


In cleaning it, it is best to use brush that has a nylon bristle. It should also be paired with a household cleaner which is non abrasive. Do the cleaning very gently.


As you observe, it is almost the same procedure for both. The difference is that, there are more stuff needed when cleaning a natural marble. What ever type you have, you simply have to make sure that it is clean all the time. As much as possible, you need to inspect them on a daily basis. As said, things that are made with this material is expensive. You sure can not afford seeing yours totally scratched and damaged due to your own negligence. If you think you can not monitor it every now and then, you may ask someone else to do so.


When you are looking for information about marble and metal maintenance New York City residents should pay a visit to the web pages online here today. You can see details at http://ift.tt/1lHR7aE now.



The post Marble And Metal Maintenance The Easier And Cheaper Way appeared first on downshar.com.






Marble And Metal Maintenance The Easier And Cheaper Way



via downshar http://ift.tt/S8Z5xO

0 commentaires:

Enregistrer un commentaire